HiModel
HIMODEL GX SEIRES 125A 3-7S BRUSHLESS ELECTRIC SPEED CONTROLLER TYPE GX-125A
| Type | GX-125A-OPTO |
| · Weight | 83.4g / 2.92 oz (with wires) |
| · Size | 65 x 40 x 12 mm |
| · Constant Current | 125A (under good cooling condition) |
| · Max Current | 150A (for ten seconds) |
| · Cut-off | 3.0V per cell for Lipo |
| · PWM | 8 Khz, 16Khz |
| · Input | 5 - 20 Ni-Mh/Ni-Cd or 3 - 7 Lipo (6-30V) |
| option 1 | auto set-up throttle range |
| option 2 | fixed throttle range |
| option 3 | high acceleration (hard start) |
| option 4 | low acceleration (soft start) |
| option 1 | no brake |
| option 2 | light brake |
| option 3 | medium brake |
| option 4 | heavy brake |
| option 1 | default running direction |
| option 2 | reverse runing |
| option 3 | hard brake |
| option 4 | soft brake |
| option 3 | 15° |
| option 4 | 30° |
| option 2 | 16K |
, , , , , , Specifications:, , , , , , , , , , , · BEC: No, Setting:, 1. Cut-off main power of speed controller, switch on the transmitter and receiver., 2. Move throttle stick to up position (full open), 3. Switch on the main power of speed controller, 4. Wait for beeps of the speed controller, Options of set up:, 1. Cut-off voltage, option 1. Ni-Mh battery, auto setup, option 2. cut-off for 7S lipo, option 3. cut-off for 6S lipo, option 4. cut-off for 5S lipo, option 5. cut-off for 4S lipo, option 6. cut-off for 3S lipo, 2. Start-up mode, 3. brake, 4. Running features, 5. Timing modes, option 1: 2°, option 2: 7°, 6. PWM modes, option 1: 8K, , ,
Features: ●Auto detect the cells and type of batteries, and ...4 Reviews
HiModel
HIMODEL GX SEIRES 125A 3-7S BRUSHLESS ELECTRIC SPEED CONTROLLER W/BEC TYPE GX-125A-BEC
| Type | GX-125A-BEC |
| · Weight | 86g / 3.03 oz |
| · Size | 65 x 40 x 15 mm |
| · Constant Current | 125A (under good cooling condition) |
| · Max Current | 150A (for ten seconds) |
| · BEC | switch mode 3-8S, 5A |
| · Cut-off | 3.0V per cell for Lipo |
| · PWM | 8 Khz, 16Khz |
| · Input | 5 - 20 Ni-Mh/Ni-Cd or 3 - 7 Lipo (6-30V) |
| option 1 | auto set-up throttle range |
| option 2 | fixed throttle range |
| option 3 | high acceleration (hard start) |
| option 4 | low acceleration (soft start) |
| option 1 | no brake |
| option 2 | light brake |
| option 3 | medium brake |
| option 4 | heavy brake |
| option 1 | default running direction |
| option 2 | reverse runing |
| option 3 | hard brake |
| option 4 | soft brake |
| option 3 | 15° |
| option 4 | 30° |
| option 2 | 16K |
, , , , , , Specifications:, , , , , , , , , , , Setting:, 1. Cut-off main power of speed controller, switch on the transmitter and receiver., 2. Move throttle stick to up position (full open), 3. Switch on the main power of speed controller, 4. Wait for beeps of the speed controller, Options of set up:, 1. Cut-off voltage, option 1. Ni-Mh battery, auto setup, option 2. cut-off for 7S lipo, option 3. cut-off for 6S lipo, option 4. cut-off for 5S lipo, option 5. cut-off for 4S lipo, option 6. cut-off for 3S lipo, 2. Start-up mode, 3. brake, 4. Running features, 5. Timing modes, option 1: 2°, option 2: 7°, 6. PWM modes, option 1: 8K, , ,
Features: ●Auto detect the cells and type of batteries, and ...HiModel
HIMODEL GX SEIRES 200A 3-7S BRUSHLESS ELECTRIC SPEED CONTROLLER TYPE GX-200A-OPTO
| Type | GX-200A-OPTO |
| ● Weight | 124g / 4.37 oz |
| ● Size | 65 x 40 x 16 mm |
| ● Constant Current | 200A (under good cooling condition) |
| ● Max Current | 230A (for ten seconds) |
| ● Cut-off | 3.0V per cell for Lipo |
| ● PWM | 8 Khz, 16Khz |
| ● Input | 5 - 20 Ni-Mh/Ni-Cd or 3 - 7 Lipo (6-30V) |
, , , , , , Specifications:, , , , , , , , , , , ● BEC: No, * Water cooling system must be used for boat application (not provided with the ESC), damage due to poor ventilation is not covered by warranty., *This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos., , ,
Features: ●Safe start, it will not start up when throttle ...12 Reviews
HiModel
HIMODEL GX SEIRES 200A 4-8S ELECTRIC SPEED CONTROLLER W/BEC TYPE GX-200A-BEC
| Type | GX-200A-BEC |
| ● Weight | 130g / 4.59 oz |
| ● Size | 65 x 40 x 20 mm |
| ● Constant Current | 200A (under good cooling condition) |
| ● Max Current | 230A (for ten seconds) |
| ● BEC | switch mode 4-8S, 5A |
| ● Cut-off | 3.0V per cell for Lipo |
| ● PWM | 8 Khz, 16Khz |
| ● Input | 4 - 8S Lipo |
, , , , , , Specifications:, , , , , , , , , , , * THIS ESC IS NOT DESIGNED FOR BOATS APPLICATION, EVEN THERE ARE MANY SUCCESSFUL EXPERIENCES FROM EXPERIENCED BOATS RACERS ONCE EQUIPPED WITH WATER COOLING SYSTEM., EFFICIENT WATER COOLING SYSTEM MUST BE EQUIPPED FOR BOATS APPLICATION, THERE IS NO WARRANTY FOR BOATS APPLICATION, BECAUSE A POOR WATER COOLING SYSTEM MAY CAUSE OVERHEAT AND DAMAGE THE ESC, YET THE EFFICIENCY OF WATER-COOLING SYSTEM IS VERY MUCH DEPENDING ON CUSTOMER'S DESIGN AND WORKMANSHIP., , ,
Features: ●Safe start, it will not start up when throttle ...9 Reviews
HiModel
HIMODEL FLYHYPER 2-3S 10A ELECTRIC SPEED CONTROL (ESC) FH-10A
| Type | FH-10A |
| Weight | 12g |
| Size | 36x21x7 mm |
| Constant Current | 12A |
| Max Current | 12A (for ten seconds) |
| BEC | Yes, 1A / 5V |
| Input | 2 to 3 Li-Po |
| Brake Setting | On/Off, the default is Off; |
| Setting for battery type | LiPo (lithium) or NiCd / NiMh (nickel metal hydride / nickel at),the default is LiPo; |
| Low-voltage protection threshold setting | low / medium / high, the default is medium (3.0v/65%); |
| Motor timing setting (increase the efficiency and the start stability of the electronic governor) | low/medium/high,the default is medium (3.0v/65%); |
| Accelerated startup setting (for precision gearboxes and helicopters) | (provide the rapid accelerated startup with linear throttle response), the default is soft; |
| Motor steering (clockwise / counterclockwise) | forward steering / reverse steering, the default is forward steering; |
| PWM operating frequency | 8kHz、16kHz, the default is 8KHz; |
| Low voltage protection modes (lower power or stop immediately) | lower power / immediately stop, the default is lower power. |
, , , , , , Specifications:, , , , , , , , , , , Helicopter mode (for helicopters), the default is off;, , ,
Features: - With helicopter mode, can be used for both ...1 Reviews
HiModel
HIMODEL FLYHYPER 2-4S 20A ELECTRIC SPEED CONTROL (ESC) FH-20A
| Type | FH-20A |
| Weight | 30g |
| Size | 54x25x11 mm |
| Constant Current | 20A |
| Max Current | 25A (for ten seconds) |
| BEC | Yes, 3A / 5V |
| Input | 2 to 4 Li-Po, or 5 to 12 Ni-MH/Ni-Cd |
| Brake Setting | On/Off, the default is off; |
| Setting for battery type | LiPo (lithium) or NiCd/ NiMh (nickel metal hydride / nickel at), the default is LiPo |
| Low-voltage protection threshold setting | low / medium / high, the default is medium (3.0v/65%); |
| Motor timing setting (increase the efficiency and the start stability of the electronic governor) | low/medium/high, the default is medium (3.0v/65%); |
| Accelerated startup setting (for precision gearboxes and helicopters) | (provide the rapid accelerated startup with linear throttle response), the default is soft; |
| Motor steering (clockwise / counterclockwise) | forward steering / reverse steering, the default is forward steering; |
| PWM operating frequency | 8KHz/ 16kHz, the default is 8KHz; |
| Low voltage protection modes (lower power or stop immediately) | lower power / immediately stop, the default is lower power. |
, , , , , , Specifications:, , , , , , , , , , , Helicopter mode (for helicopters), the default is off;, , ,
Features: - With helicopter mode, can be used for both ...HiModel
HIMODEL FLY SEIRES BRUSHLESS SPEED CONTROL TYPE FLY-25A
| Type | FLY-25A |
| · Weight | 18g |
| · Size | 32 x23 x7 mm |
| · Constant Current | 25A |
| · Max Current | 30A (for ten seconds) |
| · BEC | Yes, 2A |
| · PWM | 8 KHz |
| · Input | 2 to 3 Li-Po, or 6 to10Ni-MH/Ni-Cd |
, , , , , , Specifications:, , , , , , , , , , , · FET: 12, , ,
3 Reviews
HiModel
HIMODEL FLY SEIRES BRUSHLESS SPEED CONTROL TYPE FLY-33A
| · Weight | 25 g |
| · Size | 42 x23 x7 mm |
| · Constant Current | 33A |
| · Max Current | 40A (for ten seconds) |
| · BEC | Yes, 2A |
| · PWM | 8 KHz |
| · Input | 2 to 3 Li-Po, or 6to10Ni-MH/Ni-Cd |
, , , , , , Specifications:, , , , , , , , , , , · FET: 18, , ,
2 Reviews
HiModel
HIMODEL FLY SEIRES 3 - 10S 100A ELECTRIC SPEED CONTROLLER TYPE FLY-100A-HV
| Type | FLY-100A-HV |
| · Weight | 327 g / 11.5 oz |
| · Size | 151 x60 x30mm |
| · Constant Current | 100A |
| · Max Current | 150A (for ten seconds) |
| · PWM | 8 Khz |
| · Input | 3 to 10 Li-Po or 8 - 30 Ni-Mh/Ni-Cd. |
, , , , , , Specifications:, , , , , , , , , , , · BEC:NO, , ,
HiModel
HIMODEL GX SEIRES 30A BRUSHLESS ELECTRIC SPEED CONTROLLER FOR HELICOPTERS TYPE GX-H30A
| Type | GX-H30A |
| · Weight | 18g (excluding wires) / 25g (including wire) |
| · Size | 40 X 24 X 7（mm） |
| · Constant Current | 30A |
| · Max Current | 40A (for ten seconds) |
| · BEC | 3A at 5V |
| · PWM | 8 Khz |
| · Input | 2 - 3 Lipo |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: ●Auto detect the cells and type of batteries, and ...HiModel
ICE SERIES 60A 2-6S BRUSHLESS SPEED CONTROL FOR AIRPLANE/HELICOPTER TYPE FLY 60A-ICE SB
| Type | FLY 60A-ICE SB |
| Size | 64 x 32.8 x 13.3 mm |
| Constant Current | 60A |
| Max Current | 80A for 10 seconds |
| Input Voltage | 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery |
| BEC | yes, Switch BEC |
| BEC Output | 5.5V/6A |
| PWM | 8-16 KHz |
| Max RPM | 240,000rpm for 2 Poles Brushless Motor |
| Weight | 56g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: * Compatible with a programming card to change and ...4 Reviews
HiModel
ICE SERIES 80A 2-6S BRUSHLESS SPEED CONTROL FOR AIRPLANE/HELICOPTER TYPE FLY 80A-ICE SB
| Type | FLY 80A-ICE SB |
| Size | 72 x 32.8 x 13 mm |
| Constant Current | 80A |
| Max Current | 100A for 10 seconds |
| Input Voltage | 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery |
| BEC | yes, Switch BEC |
| BEC Output | 5.5V/6A |
| PWM | 8-16 KHz |
| Max RPM | 240,000rpm for 2 Poles Brushless Motor |
| Weight | 58g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: * Compatible with a programming card to change and ...4 Reviews
HiModel
ICE SERIES 100A 2-6S BRUSHLESS SPEED CONTROL FOR AIRPLANE/HELICOPTER TYPE FLY 100A-ICE SB
| Type | FLY 100A-ICE SB |
| Size | 72 x 32.8 x 14 mm |
| Constant Current | 100A |
| Max Current | 120A for 10 seconds |
| Input Voltage | 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery |
| BEC | yes, Switch BEC |
| BEC Output | 5.5V/6A |
| PWM | 8-16 KHz |
| Max RPM | 240,000rpm for 2 Poles Brushless Motor |
| Weight | 69g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: * Compatible with a programming card to change and ...3 Reviews
HiModel
ICE SERIES 150A 2-6S BRUSHLESS SPEED CONTROL FOR AIRPLANE/HELICOPTER TYPE FLY 150A-ICE SB
| Type | FLY 150A-ICE SB |
| Size | 74 x 32.5 x 18 mm |
| Constant Current | 150A |
| Max Current | 170A for 10 seconds |
| Input Voltage | 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery |
| BEC | yes, Switch BEC |
| BEC Output | 5.5V/6A |
| PWM | 8-16 KHz |
| Max RPM | 240,000rpm for 2 Poles Brushless Motor |
| Weight | 93g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: * Compatible with a programming card to change and ...3 Reviews
HiModel
ICE SERIES 60A 4-12S ESC FOR AIRPLANE/HELICOPTER TYPE FLY 60A-ICE HV
| Type | FLY 60A-ICE HV |
| Size | 71.5 x 32.6 x 12 mm |
| Constant Current | 60A |
| Max Current | 80A for 10 seconds |
| Input Voltage | 4-12 cells li-XX or 12-36 Ni-MH/Ni-Cd battery |
| BEC | none, OPTO |
| BEC Output | none |
| PWM | 8-16 KHz |
| Max RPM | 240,000rpm for 2 Poles Brushless Motor |
| Weight | 57g |
, , , , , , Specifications:, , , , , , , , , , , *This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos., , ,
Features: * Compatible with a programming card to change and ...